Insert Threads

Place a piece of thread into each kerf, leaving a good length on each side.

Here the threads are loosely in place.

Having placed the threads I apply a strip of sticky tape on one side to keep them in position until they are attached with blobs of hot melt glue.

place thread
threads taped
close-up of tape

Close-up of sticky tape holding threads in position.

[Home] [Know The Notes] [TuneFinder for Windows] [VuChord] [Subtitle Synchroniser] [VB6 to Basic Stamp 2] [Perfect Binding] [Introduction] [Warning] [Tools and Materials 1] [Tools and Materials 2] [Printing and Binding] [Clamp the Book Block] [Insert Threads] [Prepare Glue Gun] [Trim Threads] [Fuse Spine to Cover] [Glue and Trim Rear Cover] [Repair an Addis Mop] [Letterbox Alert] [Feedback]